HVAC Motors

Motor Finder
Set Ascending Direction
Page
per page
  1. Century 1/3 HP Direct Drive Blower Motor, Permanent Split Capacitor, 1075 Nameplate RPM, 208-230 Voltage - D1036
     
  2. Century 1/2 HP Direct Drive Blower Motor, Permanent Split Capacitor, 1075 Nameplate RPM, 208-230 Voltage - D1056
     
  3. Dayton 1/30 HP, HVAC Motor, Shaded Pole, 1550 Nameplate RPM, 115 Voltage, Frame 3.3 - 3M546
     
    popularity: 100 Dayton 1/30 HP, HVAC Motor, Shaded Pole, 1550 Nameplate RPM, 115 Voltage, Frame 3.3 - 3M546 Product Code: #C1557355
    Special Price $71.23 List Price $86.87
  4. Dayton 1/3 HP Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115 Voltage, Frame 48Y - 6K778
     
    popularity: 100 Dayton 1/3 HP Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115 Voltage, Frame 48Y - 6K778 Product Code: #C1566645
    Special Price $98.25 List Price $119.82
  5. Dayton 1/4 HP Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115 Voltage, Frame 56Z - 5K977
     
    popularity: 100 Dayton 1/4 HP Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115 Voltage, Frame 56Z - 5K977 Product Code: #C1563879
    Special Price $124.54 List Price $151.88
  6. Dayton 1/15 HP, HVAC Motor, Shaded Pole, 3000 Nameplate RPM, 115 Voltage, Frame 3.3 - 3M548
     
    popularity: 100 Dayton 1/15 HP, HVAC Motor, Shaded Pole, 3000 Nameplate RPM, 115 Voltage, Frame 3.3 - 3M548 Product Code: #C1557357
    Special Price $76.96 List Price $93.86
  7. popularity: 99 Dayton 1/10 HP HVAC MotorShaded Pole1550 Nameplate RPM115 VoltageFrame 4.4 - 3M576 Product Code: #C1557371
    Special Price $121.81 List Price $148.55
  8. popularity: 99 Dayton 1 HP Condenser Fan Motor, 3-Phase, 1140 Nameplate RPM, 208-230/460 Voltage, Frame 56YZ - 24PR72 Product Code: #C1549688
    Special Price $298.42 List Price $363.93
  9. popularity: 99 Dayton 1 HP Condenser Fan Motor, 3-Phase, 1140 Nameplate RPM, 208-230/460 Voltage, Frame 56YZ - 24PR78 Product Code: #C1549694
    Special Price $352.69 List Price $430.11
  10. popularity: 99 Dayton 1/30 HP, HVAC Motor, Shaded Pole, 3000 Nameplate RPM, 230 Voltage, Frame 3.3 - 3M725 Product Code: #C1557381
    Special Price $75.75 List Price $92.38
  11. popularity: 99 Dayton 1/40 HP, HVAC Motor, Shaded Pole, 3000 Nameplate RPM, 115 Voltage, Frame 3.3 - 3M730 Product Code: #C1557383
    Special Price $58.64 List Price $71.51
  12. popularity: 99 Dayton 1/30 HP, HVAC Motor, Shaded Pole, 3000 Nameplate RPM, 115 Voltage, Frame 3.3 - 3M777 Product Code: #C1557385
    Special Price $77.33 List Price $94.30
  13. popularity: 99 Dayton 1/3 HP Pedestal Fan Motor, Split-Phase, 1725 Nameplate RPM, 115 Voltage, Frame 48YZ - 4UX68 Product Code: #C1561957
    Special Price $272.14 List Price $331.88
  14. popularity: 99 Dayton 3/4 HP Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115/208-230 Voltage, Frame 56 - 4VAG3BG Product Code: #C1561961
    Special Price $307.08 List Price $374.49
  15. popularity: 99 Dayton 3/4 HP Belt Drive Motor, Capacitor-Start, 1725 Nameplate RPM, 115/208-230 Voltage, Frame 56 - 4VAG7 Product Code: #C1561965
    Special Price $227.16 List Price $277.03
  16. popularity: 99 Dayton 1/2 HP Pedestal Fan Motor, Split-Phase, 1725 Nameplate RPM, 115 Voltage, Frame 48YZ - 6K405 Product Code: #C1566603
    Special Price $222.63 List Price $271.50
Set Ascending Direction
Page
per page
 
DC Motors Definite Purpose AC Motors General Purpose AC Motors
Brushless Blowers
DC Motor and Control Assemblies
DC Permanent Magnet Motors
Small Engine Starter Motors
Stepper Motors
DC Wound Field Motors
50 Hz Motors
Air Compressor Motors
Cooling Tower Motors
Farm Duty Motors
Hazardous Location Motors
Instant Reverse Motors
Stationary Power Tool Motors
Universal AC/DC Motors
Vacuum Motors
Vector Motors
Vibrator Motors
Washdown Motors
Kiln Motors

Brake Motors
General Purpose AC Motors
Metric Three Phase Motors
HVAC Motors Motor Supplies Pump Motors
3.3 Inch Diameter Motors
4.4 Inch Diameter Motors
Belt Drive Motors
Brushless ECM Motors
C-Frame Motors
Condenser Fan Motors
Direct Drive Blower Motors
Draft Booster Motors
Evaporative Cooler Motors
OEM Replacement Motors
Oil Burner Motors
Pedestal Fan Motors
Room Air Conditioner Motors
Transformer Cooling Fan Motors
Unit Bearing Motors
Unit Heater Motors
Water Circulator Motors
AC Speed Controls
Adjustable Frequency Drive Accessories
Ball Bearing Mandrels
Blower/Motor Controllers
Capacitor Accessories
Capacitors
Combination Soft Starts
Commutator Maintenance Products
DC Speed Controls
Drive Reactors and Filters
HVAC Contractor Service Kits
Keyed Shafts
Motor Accessories
Motor Mount Adapters
Motor Mounting Bases
Motor Mounting Brackets
Motor Mounting Rings
Motor Rainshields
Power Factor Correction Capacitors
Pulse Generators
Rotary Encoders
Shaft Power Monitor Accessories
Shaft Power Monitors
Soft Start Accessories
Soft Starts
Stepper Motor Controllers
Stepper Motor Drivers
Variable Frequency Drives
Vector Motor Brakes
Vector Motor Encoders
Car Wash Motors
Carbonator Pump Motors
Close-Coupled Pump Motors
Deep Well Submersible Pump Motors
Fire Pump Motors
Jet Pump Motors
Oil Well Pumping Motors
Pool and Spa Pump Motors
Pressure Washer Motors
Square Flange Pool Pump Motors
Vertical Pump Motors
 
 

Need Help with Your Nameplate?
Reading a motor’s nameplate can often be challenging. Nameplates differ according to manufacturer, and a variety of factors, such as dirt and damage, can hide crucial information needed to size a Variable Frequency Drive (VFD), make a repair, find a replacement, correct the power factor, purchase parts, or do almost anything with the motor. But even a clean nameplate can be confusing with all of the abbreviations and codes used in such a small space. The following guide is designed to help you understand the crucial information contained on your motor’s nameplate.





Step 1: Gather Nameplate Information
Listed below is the information you will need to select your motor. If you are replacing an existing motor, the following information can be located on the nameplate of the motor. See the sample nameplate on this page:


  1. Phase (PH): Either single (1) or three (3). This should match exactly.

  2. Voltage (Volts): This should match exactly.

  3. Horsepower (HP): Very small motors are often rated in watts. Choose an equal or next higher HP.

  4. Physical Size/Frame (FR): This should match exactly.

  5. Speed (RPM): This should match within 5%.

  6. Frequency (Hz): This should match exactly.

  7. Service Factor (SF): This should be an equal or greater number.

  8. Type: See below.

    a. Shaded Pole - Small direct-drive fans and blowers
    b. PSC - Direct-drive fans and blowers
    c. Split-Phase - Belt-drive and direct-drive fans and blowers, small tools, centrifugal pumps, and appliances
    d. Capacitor-Start - Pumps, compressors, tools, conveyors, farm equipment, and industrial ventilators
    e. 3-Phase - Applications where 3-Phase power is available

  9. Enclosure (Encl.): See below.

    a. ODP/Open - Clean, dry, non hazardous environments
    b. Enclosed TEFC/TENV - Dirty, moist, non hazardous environments
    c. Hazardous - Designed for use in hazardous environments as defined by National Electric Code (NEC) classifications. NEC Class and Group are designated on UL Hazardous Location nameplate mounted on the motor.

  10. Duty Cycle: If the current motor is an intermittent duty, it is possible to upgrade to continuous. Air-over must be installed in the driven fan blade’s airstream.

  11. Bearing Type: Sleeve or ball bearings

  12. Thermal Protection


Step 2: Determine Your Motor Type
General-Purpose Motors are intended for mechanical loads, air-moving, and for hard to start applications such as conveyors, belt-driven equipment, machine tools, and reciprocating pumps. These motors utilize ball bearings to handle heavier loads and heavier construction for industrial applications.

Definite-Purpose Motors are used in specific applications and the motor’s features are all driven by the specific application. Such motors include washdown, hazardous location, pump duty, etc.

HVAC Motors are designed primarily for air moving and other light to medium duty applications such as fans, centrifugal pumps, small tools, and office equipment. DC Motors are used in numerous industrial applications because the speed to torque relationship is so flexible. Speeds can be varied, and full torque can be reached within the operational speed range.

DC Motors are used on constant-torque loads such as conveyor belts, elevators, cranes, and more.

Step 3: Select the Motor
Sustainable Supply has a great selection of electric motors, including HVAC motors, definite purpose motors, dc motors, and more! Order today and take advantage of fast shipping on the many varieties of industrial and commercial motors. Our huge selection provides you with the right product for any application. These heavy-duty motors are suitable for use with fans, blowers, whole-house fans, air circulators, air coolers and more. We also carry energy-saving motors, such as totally enclosed fan-cooled motors that are NEMA premium recognized as environmentally preferred and highly efficient. Check out our full selection of electric motors with over 4000 models to choose from.