Availability : Usually Ships in 1-2 Business Days
Direct Drive Blower Motor, Motor Application HVAC/R, Motor Sub Application Direct Dr Fan/Blower, Motor Type Shaded Pole, Enclosure Open Air-Over, HP 1/6, Nameplate RPM 1000, Voltage 115, Full Load Amps 5.7, Hz 60, Phase 1, Frame 42Y, Service Factor 1.0, Max. Ambient Temp. 40 Degrees C, Insulation Class B, Duty Continuous Air Over, Number of Speeds 1, Mounting Stud, Shaft Orientation Horizontal, Bearings Sleeve, Thermal Protection Auto, Rotation CCWLE, Body Dia. 5", Length Less Shaft 4", Shaft Dia. 1/2", Shaft Length 2-1/2", Shaft Type Flat, Capacitor Included Not Required, Capacitor Required None, Stud Location Shaft End, Stud Pattern 4-5/8", Stud Size #10-32 UNF-2A, Bolt Circle Dia. 4-5/8", RPM Range 1001-1100, Standards UL Recognized, CSA Certified, Application Furnace Blowers, Unit Heaters, Air Circulators, Fans
Item | Direct Drive Blower Motor |
Motor Application | HVAC/R |
Motor Sub Application | Direct Dr Fan/Blower |
Motor Type | Shaded Pole |
Enclosure | Open Air-Over |
HP | 1/6 |
Nameplate RPM | 1000 |
Voltage | 115 |
Full Load Amps | 5.7 |
Hz | 60 |
Phase | 1 |
Frame | 42Y |
Service Factor | 1.0 |
Max. Ambient Temp. | 40 Degrees C |
Insulation Class | B |
Duty | Continuous Air Over |
Number of Speeds | 1 |
Mounting | Stud |
Shaft Orientation | Horizontal |
Bearings | Sleeve |
Thermal Protection | Auto |
Rotation | CCWLE |
Body Dia. | 5" |
Length Less Shaft | 4" |
Shaft Dia. | 1/2" |
Shaft Length | 2-1/2" |
Shaft Type | Flat |
Capacitor Included | Not Required |
Capacitor Required | None |
Stud Location | Shaft End |
Stud Pattern | 4-5/8" |
Stud Size | #10-32 UNF-2A |
Bolt Circle Dia. | 4-5/8" |
RPM Range | 1001-1100 |
Standards | UL Recognized, CSA Certified |
Application | Furnace Blowers, Unit Heaters, Air Circulators, Fans |
UNSPSC | 26101611 |