Use this permanent magnet motor with Type K DC rectified power sources matched to voltage (providing form factor does not exceed 1.3).
| Item | DC Permanent Magnet Motor |
| Motor Application | Variable Speed |
| Motor Design | DC Permanent Magnet |
| HP | 1/4; 1/7 |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| Nameplate RPM | 1750/3900 |
| Voltage | 12/24V DC |
| Full Load Amps | 14 A |
| Full Load Torque | 5.63 in-lb |
| Frame | Non-Standard |
| Motor Mounting Type | Face/Base |
| Motor Thermal Protection | None |
| Ins. Class | B |
| Bearings | Ball |
| Max. Ambient Temp. | 40 Degrees C |
| Rotation | CW/CCW |
| Overall Length | 8 3/8 in |
| Length Less Shaft | 6 7/8 in |
| Shaft Dia. | 1/2 in |
| Shaft Length | 1 1/2 in |
| Base Mounting O.C. | 6-7/16 x 2 in |
| Face Mounting O.C. | 2-5/8 x 2-5/8 |
| Brush Type | External |
| Standards | UL Recognized (E61772) |
| Voltage Compatibility | 12V DC, 24V DC |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
