This motor is designed with an integral yoke bracket. The studs allow the fan guard to be mounted directly to the shaft endshield.
| Item | Oscillating Fan Motor |
| Motor Design | Permanent Split Capacitor |
| Phase | 1 |
| HP | 1/2 |
| No. of Speeds | 2 |
| Voltage | 115 |
| Motor Shaft Rotation | CWSE |
| Frame | 48YZ |
| Motor Enclosure Design | Totally Enclosed Air-Over |
| Motor Mounting Type | Yoke |
| Shaft Dia. | 5/8 in |
| Shaft Length | 3 1/16 in |
| Motor Thermal Protection | Auto |
| 10 Ft. Cord and Pull Chain Switch | Yes |
| Nameplate RPM | 875/1075 |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive Fan/Blower |
| Full Load Amps | 4.5 |
| Hz | 60 |
| Motor Service Factor | 1 |
| Ambient Temperature | 40 Degrees C |
| Max. Ambient Temp. | 40 Degrees C |
| Ins. Class | B |
| Duty | Continuous |
| Motor Bearings | Ball |
| Body Dia. | 5 5/8 in |
| Overall Length | 13 15/16 in |
| Motor Shaft Design | Flat |
| Application | Air Circulators where Motor is Mounted Directly to Fan Column |
| Capacitor Required | Included |
| Standards | CSA Certified, UL Recognized |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
