- Material: MPFR Series is 16 gauge satin coat steel front door with 20 gauge backliner and 16 gauge satin coat steel frame.
- Finish: Satin coat steel doors have a prime white finish.
- Door: Flush to frame. Self-closing. Can be opened from the inside or back of the door with MIFAB's unique thumb turn latch.
- Frame: Four piece welded frame with masonry mounting straps. Hinge: Concealed pivot pins.
- Spring: Heavy Duty. An extra spring is provided with every door greater than 14" x 14" (356 x 356) for ceiling installation. Both springs must be attached to the door to ensure that the door will close when installed in the ceiling. Latch: Standard - flush mounted, interchangeable turn ring operator and key operator latch. Fire rating: Underwriters Laboratories "B" label. 1 1/2 hours for walls. Warnock Hersey: 1 hour combustible ceilings and walls, 2 hour non-combustible ceilings, and 3 hour non-combustible walls. Ceiling fire ratings are up to and including the 24" x 36" (610 x 914) size. Insulation: Roxul Rockboard 80. 2" (50) thick and fire retardant
The MIFAB MPFR fire rated access door is approvd by Underwriters Laboratories Inc., for 1 1/2 hours, "B" label in walls and is approved by Warnock Hershey for 2 hours in ceilings and 3 hours in walls. The door meets ANSI-UL 10B standards. The same door can be used in walls and ceilings. Tests were conducted using mild steel and Type 304 stainless steel.
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
