Dayton 1/3 HP Washdown Motor,3-Phase,1745 Nameplate RPM,208-230/460 Voltage,Frame 56C - 6WY28

DaytonSKU: C2776962
MPN : 6WY28
Weight : 29.5 lb


$734.13 $1,184.08

Availability : Usually Ships in 1-3 Business Days

For use in the food processing, chemical processing, and beverage industries, this motor is well-sealed against moisture and condensation to protect internal components. It has a completely paint- and coating-free exterior. All exterior components are 300 Series stainless steel to provide maximum corrosion resistance in severe-duty and washdown environments. Heavy polyester insulating varnish is applied to the windings for extra moisture and corrosion resistance. Additional features include moisture-resistant sealant between the frame and endbells, and double-sealed oversized bearings with rust-inhibitive grease. The shaft-end bearing is locked internally to limit axial endplay. Four drains in each endshield allow drainage of condensation in any mounting position.

ItemWashdown Motor
Motor ApplicationWashdown
Motor Design3-Phase
Motor Enclosure DesignTotally Enclosed Nonventilated
Nameplate RPM1745
Motor Shaft RotationCW/CCW
Full Load Amps1.4-1.2/0.6
Motor Mounting TypeFace/Base
Motor BearingsBall
Motor Frame MaterialStainless Steel
Motor Thermal ProtectionNone
Motor Service Factor1.15
Max. Ambient Temp.40 Degrees C
Shaft Dia.5/8 in
Shaft Length1 7/8 in
Motor Shaft DesignKeyed
Overall Length9 7/8 in
Ins. ClassF
RPM Range1701-1800
Shaft Material300 Series Stainless Steel
Drain Plugs4 Condensate Drains (at 3, 6, 9 and 12 O'clock) Plus 2 T-drains (1 Pre-installed Opposite Shaft End in 6 O'clock Position, the Other Loose in the Carton for Customer Installation at Low Point of Motor)
Endshields300 Series Stainless Steel
Motor Efficiency GroupEnergy Efficient
Nominal Efficiency82.5 %
StandardsCE Compliant, CSA Certified, UL Component Recognized
Voltage Compatibility208, 208-220/440, 2