Franklin 1/2 HP Deep Well Submersible Pump Motor,Split-Phase,3450 Nameplate RPM,115 Voltage - 2445049004S
Availability : Usually Ships in 1-3 Business Days
Deep Well Submersible Pump Motor; Motor Application: Pump; Motor Sub Application: Deep Well Submersible Pump; Motor Design: Split-Phase; Motor Enclosure Design: Totally Enclosed Nonventilated; HP: 1/2; Nameplate RPM: 3450; Voltage: 115; Phase: 1; Full Load Amps: 10; Max. SF Amps: 12; Hz: 60; Motor Service Factor: 1.6; Max. Ambient Temp.: 86 Degrees F; Thrust Rating: 300 lb; Number of Wires: 2; Motor Thermal Protection: Auto; Motor Shaft Rotation: CCWSE; Dia.: 4 in; Diaphragm Type: Pressure Equalizing; Shaft Material: Splined Stainless Steel; Shell Material: Corrosion Resistant Stainless Steel; Stator Type: Hermetically Sealed; Lead Length: 48 in; Height: 9 1/2 in; Starter Required: No; Overload Relay Required: No; RPM Range: 3001-3600
| Item | Deep Well Submersible Pump Motor |
| Motor Application | Pump |
| Motor Sub Application | Deep Well Submersible Pump |
| Motor Design | Split-Phase |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| HP | 1/2 |
| Nameplate RPM | 3450 |
| Voltage | 115 |
| Phase | 1 |
| Full Load Amps | 10 |
| Max. SF Amps | 12 |
| Hz | 60 |
| Motor Service Factor | 1.6 |
| Max. Ambient Temp. | 86 Degrees F |
| Thrust Rating | 300 lb |
| Number of Wires | 2 |
| Motor Thermal Protection | Auto |
| Motor Shaft Rotation | CCWSE |
| Dia. | 4 in |
| Diaphragm Type | Pressure Equalizing |
| Shaft Material | Splined Stainless Steel |
| Shell Material | Corrosion Resistant Stainless Steel |
| Stator Type | Hermetically Sealed |
| Lead Length | 48 in |
| Height | 9 1/2 in |
| Starter Required | No |
| Overload Relay Required | No |
| RPM Range | 3001-3600 |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
