For use where manual backflow operation is required. Suitable for back flushing, draining lines, priming pumps, and for system testing.
| Item - Check Valves | Check Valve |
| Flow Design | Single |
| Mechanism and Body Design | Inline Swing Flex |
| Body Material - Valves | Cast Iron |
| Pipe or Tube Size - Check Valves | 8 in |
| Connection Type - Check Valves | Flange x Flange |
| Cracking Pressure - Check Valves | 0.25 psi |
| Mounting Orientation - Check Valves | Horizontal, Vertical |
| Seal Material - Check Valves | Metal |
| Max. Temp. - Valves | 200 Degrees F |
| Min. Temp. - Valves | 33 Degrees F |
| Max. Water Pressure - Valves | 250 psi |
| Max. Steam Pressure - Valves | Not Rated |
| Seat Material - Check Valves | Buna-N |
| Flow - Valves | 2,250 gpm |
| Full Flow - Valves | No |
| Application - Valves | General Purpose |
| Length | 19 1/2 in |
| Width | 13 1/2 in |
| Standards | ANSI B16.1 Class 125 |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
