Ideal for indexing and other rapid positioning applications, this stepping motor is for locations with limited space and where a high-speed, high-torque motor is required. It presents no maintenance or communication problems, as can be found with servo motors. The required motor driver and motion controller are available separately.
| Item | Stepper Motor |
| Phase | 5 |
| Frame Size | NEMA 34 / 85mm |
| Shaft Type | Geared Shaft |
| Max. Holding Torque | 19.61nm / 2777.48 oz-in |
| Resolution | 0.72 deg Full Step |
| Amps per Phase | 1.4 |
| Gear Ratio | 1 |
| Rotor Inertia | 2700 g-cm2 |
| Winding Resistance | 2.6 ohm |
| Overall Length | 5 11/16 in |
| Height | 2 3/8 in |
| Width | 2 3/8 in |
| Shaft Dia. | 18 mm |
| Shaft Length | 32 mm |
| Mounting | Face |
| Mounting Pattern | 70 x 70mm |
| Requires | Driver 5PFF4 or 5PFF5, Controller 5PFF8 or 5PFF9, Cable 5PFG0 or 5PFG1 |
| Standards | CE, RoHS |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
