Direct Drive Blower Motor; Motor Application: HVAC/R; Motor Sub Application: Direct Drive Fan/Blower; Motor Design: Shaded Pole; Motor Enclosure Design: Open Air-Over; HP: 1/4; Nameplate RPM: 1050; Voltage: 115; Full Load Amps: 8.2; Hz: 60; Phase: 1; Frame: 42Y; Motor Service Factor: 1; Max. Ambient Temp.: 40 Degrees C; Ins. Class: A; Duty: Continuous; No. of Speeds: 3; Motor Mounting Type: T-Flex; Motor Mounting Position: Horizontal; Motor Bearings: Sleeve; Motor Thermal Protection: Auto; Motor Shaft Rotation: CCWLE; Body Dia.: 5 in; Length Less Shaft: 4 5/8 in; Shaft Dia.: 1/2 in; Shaft Length: 4 3/8 in; Motor Shaft Design: Flat; Capacitor Required: No; Standards: CSA Certified, UL Recognized; Application: Blowers, Fans and Air Circulators; Voltage Compatibility: 115, 120
| Item | Direct Drive Blower Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Design | Shaded Pole |
| Motor Enclosure Design | Open Air-Over |
| HP | 1/4 |
| Nameplate RPM | 1050 |
| Voltage | 115 |
| Full Load Amps | 8.2 |
| Hz | 60 |
| Phase | 1 |
| Frame | 42Y |
| Motor Service Factor | 1 |
| Max. Ambient Temp. | 40 Degrees C |
| Ins. Class | A |
| Duty | Continuous |
| No. of Speeds | 3 |
| Motor Mounting Type | T-Flex |
| Motor Mounting Position | Horizontal |
| Motor Bearings | Sleeve |
| Motor Thermal Protection | Auto |
| Motor Shaft Rotation | CCWLE |
| Body Dia. | 5 in |
| Length Less Shaft | 4 5/8 in |
| Shaft Dia. | 1/2 in |
| Shaft Length | 4 3/8 in |
| Motor Shaft Design | Flat |
| Capacitor Required | No |
| Standards | CSA Certified, UL Recognized |
| Application | Blowers, Fans and Air Circulators |
| Voltage Compatibility | 115, 120 |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
