Direct-Drive Blower Motors,NEMA frame: 48Y (5-3/4" body dia.) Enclosure: open Mounting: ring/stud/band/hole Service factor: 1.0 Insulation: Class B Thermal protection: auto Shaft orientation: horizontal Rotation: CW/CCW Duty: continuous,Replace Emerson, Fasco, Genteq, Marathon and Protech fan and blower motors in residential and light commercial HVAC systems. Motors have predrilled holes for Rheem mounting. Include capacitor and reversing plug.,UL Recognized and CSA Certified.
| Item | Direct Drive Blower Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| HP | 1/2 to 1/6 |
| Nameplate RPM | 1075 |
| Voltage | 208-230 |
| Full Load Amps | 3.9 |
| Hz | 60 |
| Phase | 1 |
| Frame | 48Y |
| Motor Service Factor | 1 |
| Max. Ambient Temp. | 40 Degrees C |
| Ins. Class | B |
| Duty | Continuous |
| No. of Speeds | 4 |
| Motor Mounting Type | Stud |
| Motor Mounting Position | Horizontal |
| Motor Bearings | Sleeve |
| Motor Thermal Protection | Auto |
| Motor Shaft Rotation | CW/CCW |
| Body Dia. | 5 3/4 in |
| Length Less Shaft | 5 7/8 in |
| Overall Length | 10 5/16 in |
| Shaft Dia. | 1/2 in |
| Shaft Length | 4 1/2 in |
| Motor Shaft Design | Flat |
| Capacitor Required | Included |
| Resilient Ring Dia. | 2 1/4 in |
| Ring to Ring Center | 5 7/16 in |
| Mounting Stud Location | Shaft End |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Stud Size | #8-32 |
| Mounting Stud Length | 5/8 in |
| Bolt Circle Dia. | 5 3/16 in |
| Standards | CSA Certified, UL Recognized |
| Application | Blower Motors In Residential and Light Commercial HVAC Systems, Fasco, Genteq, Marathon, Prote |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
