This CENTURY direct drive blower motor is suitable for furnace blowers and other shaft-mounted fan and blower applications.
| Item | Direct Drive Blower Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| HP | 1/5 |
| Nameplate RPM | 1075 |
| Voltage | 230 |
| Full Load Amps | 1.3 |
| Hz | 60 |
| Phase | 1 |
| Frame | 42Y |
| Motor Service Factor | 1 |
| Max. Ambient Temp. | 40 Degrees C |
| Ins. Class | B |
| Duty | Continuous |
| No. of Speeds | 3 |
| Motor Mounting Type | Stud |
| Motor Mounting Position | All Angle |
| Motor Bearings | Sleeve |
| Motor Thermal Protection | Auto |
| Motor Shaft Rotation | CW/CCW |
| Body Dia. | 5 in |
| Length Less Shaft | 4 15/16 in |
| Shaft Dia. | 1/2 in |
| Shaft Length | 5 in |
| Motor Shaft Design | Flat |
| Capacitor Required | 2MDV6 |
| Resilient Ring Dia. | 2 1/2 in |
| Ring to Ring Center | 4 9/16 in |
| Mounting Stud Location | Shaft End |
| Mounting Stud Pattern | 3-1/8 in x 3-1/8 in |
| Stud Size | #8-32 |
| Standards | CSA Certified, UL Recognized |
| Application | Blowers, Fans and Air Circulators |
| Includes | Resilient Mounting Rings |
| Voltage Compatibility | 115/230, 120/240, 230, 240 |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
