Dayton 3/4 HP Washdown Motor,Capacitor-Start/Run,1745 Nameplate RPM,115/208-230 Voltage,Frame 56HC - 11G253

DaytonSKU: C2776806
MPN : 11G253
Weight : 39.0 lb

filler

Price:
$1,108.42 $1,787.77

Availability : Usually Ships in 3 Business Days

All exterior components are 300 Series stainless steel to provide maximum corrosion resistance in severe-duty and washdown environments. This motor is well-sealed against moisture and condensation to protect internal components, and the exterior is completely paint and coating free. A heavy polyester insulating varnish is applied to the windings for extra moisture and corrosion resistance. There's also a moisture-resistant sealant between the frame and the endbells. The double-sealed oversized bearings are treated with rust-inhibitive grease. The shaft-end bearing is locked internally to limit axial endplay. 4 drains in each endshield allow drainage of condensation in any mounting position.

ItemWashdown Motor
Motor ApplicationWashdown
Motor DesignCapacitor-Start/Run
Motor Enclosure DesignTotally Enclosed Fan-Cooled
HP3/4
Nameplate RPM1745
Frame56HC
NEMA DesignB
Motor Shaft RotationCW/CCW
Voltage115/208-230
Full Load Amps7.6/4-3.8
Phase1
Hz60
Motor Mounting TypeFace/Base
Motor BearingsBall
Motor Frame MaterialStainless Steel
Motor Thermal ProtectionNone
Motor Service Factor1.15
Max. Ambient Temp.40 Degrees C
Shaft Dia.5/8 in
Shaft Length1 7/8 in
Motor Shaft DesignKeyed
Body Dia.6 1/2 in
Length Less Shaft11 1/4 in
Overall Length13 1/8 in
Ins. ClassF
RPM Range1701-1800
DutyContinuous
Shaft MaterialStainless Steel
Drain Plugs12,3,6,9 O'clock on SE and OSE Endshields
EndshieldsStainless Steel
Motor Efficiency GroupEnergy Efficient
Nominal Efficiency78 %
ApplicationBeverage Industries, Chemical Processing, Food Processing
Includes(1) T-Drain Valve and (1) Plug and T-Drain
StandardsCSA Certified, UL Recognized (E37403)
Voltage Compatibility115, 115/208-230, 115/230,