

Availability : Usually Ships in 3-5 Business Days
All exterior components are 300 Series stainless steel to provide maximum corrosion resistance in severe-duty and washdown environments. This motor is well-sealed against moisture and condensation to protect internal components, and the exterior is completely paint and coating free. A heavy polyester insulating varnish is applied to the windings for extra moisture and corrosion resistance. There's also a moisture-resistant sealant between the frame and the endbells. The double-sealed oversized bearings are treated with rust-inhibitive grease. The shaft-end bearing is locked internally to limit axial endplay. 4 drains in each endshield allow drainage of condensation in any mounting position.
Item | Washdown Motor |
Motor Application | Washdown |
Motor Design | Capacitor-Start/Run |
Motor Enclosure Design | Totally Enclosed Fan-Cooled |
HP | 1 1/2 |
Nameplate RPM | 1745 |
Frame | 56HC |
NEMA Design | B |
Motor Shaft Rotation | CW/CCW |
Voltage | 115/208-230 |
Full Load Amps | 14.8/7.6-7.4 |
Phase | 1 |
Hz | 60 |
Motor Mounting Type | Face/Base |
Motor Bearings | Ball |
Motor Frame Material | Stainless Steel |
Motor Thermal Protection | None |
Motor Service Factor | 1.15 |
Max. Ambient Temp. | 40 Degrees C |
Shaft Dia. | 5/8 in |
Shaft Length | 1 7/8 in |
Motor Shaft Design | Keyed |
Body Dia. | 6 1/2 in |
Length Less Shaft | 12 1/2 in |
Overall Length | 14 3/8 in |
Ins. Class | F |
RPM Range | 1701-1800 |
Duty | Continuous |
Shaft Material | Stainless Steel |
Drain Plugs | 12,3,6,9 O'clock on SE and OSE Endshields |
Endshields | Stainless Steel |
Motor Efficiency Group | Energy Efficient |
Nominal Efficiency | 81 % |
Application | Beverage Industries, Chemical Processing, Food Processing |
Includes | (1) T-Drain Valve and (1) Plug and T-Drain |
Standards | CSA Certified, UL Recognized (E37403) |
Voltage Compatibility | 115, 115/208-230, 115 |