Availability : Usually Ships in 3 Business Days
All exterior components are 300 Series stainless steel to provide maximum corrosion resistance in severe-duty and washdown environments. This motor is well-sealed against moisture and condensation to protect internal components, and the exterior is completely paint and coating free. A heavy polyester insulating varnish is applied to the windings for extra moisture and corrosion resistance. There's also a moisture-resistant sealant between the frame and the endbells. The double-sealed oversized bearings are treated with rust-inhibitive grease. The shaft-end bearing is locked internally to limit axial endplay. 4 drains in each endshield allow drainage of condensation in any mounting position.
| Item | Washdown Motor |
| Motor Application | Washdown |
| Motor Design | Capacitor-Start/Run |
| Motor Enclosure Design | Totally Enclosed Fan-Cooled |
| HP | 2 |
| Nameplate RPM | 3450 |
| Frame | 56HC |
| NEMA Design | B |
| Motor Shaft Rotation | CW/CCW |
| Voltage | 208-230 |
| Full Load Amps | 8.9-7.9 |
| Phase | 1 |
| Hz | 60 |
| Motor Mounting Type | Face/Base |
| Motor Bearings | Ball |
| Motor Frame Material | Stainless Steel |
| Motor Thermal Protection | None |
| Motor Service Factor | 1.15 |
| Max. Ambient Temp. | 40 Degrees C |
| Shaft Dia. | 5/8 in |
| Shaft Length | 1 7/8 in |
| Motor Shaft Design | Keyed |
| Body Dia. | 6 1/2 in |
| Length Less Shaft | 12 1/2 in |
| Overall Length | 14 3/8 in |
| Ins. Class | F |
| RPM Range | 3001-3600 |
| Duty | Continuous |
| Shaft Material | Stainless Steel |
| Drain Plugs | 12,3,6,9 O'clock on SE and OSE Endshields |
| Endshields | Stainless Steel |
| Motor Efficiency Group | Energy Efficient |
| Nominal Efficiency | 83 % |
| Application | Beverage Industries, Chemical Processing, Food Processing |
| Includes | (1) T-Drain Valve and (1) Plug and T-Drain |
| Standards | CSA Certified, UL Recognized (E37403) |
| Voltage Compatibility | 115/208-230, 208-230, 208-240 |




