All exterior components are 300 Series stainless steel to provide maximum corrosion resistance in severe-duty and washdown environments. This motor is well-sealed against moisture and condensation to protect internal components, and the exterior is completely paint and coating free. A heavy polyester insulating varnish is applied to the windings for extra moisture and corrosion resistance. There's also a moisture-resistant sealant between the frame and the endbells. The double-sealed oversized bearings are treated with rust-inhibitive grease. The shaft-end bearing is locked internally to limit axial endplay. 4 drains in each endshield allow drainage of condensation in any mounting position.
| Item | Washdown Motor |
| Motor Application | Washdown |
| Motor Design | Capacitor-Start/Run |
| Motor Enclosure Design | Totally Enclosed Air-Over |
| HP | 1/2 |
| Nameplate RPM | 1075 |
| Frame | 48YZ |
| Motor Shaft Rotation | CW/CCW |
| Voltage | 115 |
| Full Load Amps | 5.8 |
| Phase | 1 |
| Hz | 60 |
| Motor Mounting Type | Yoke |
| Motor Bearings | Ball |
| Motor Frame Material | Stainless Steel |
| Motor Thermal Protection | Auto |
| Motor Service Factor | 1 |
| Max. Ambient Temp. | 40 Degrees C |
| Shaft Dia. | 5/8 in |
| Shaft Length | 4 1/16 in |
| Motor Shaft Design | Flat |
| Body Dia. | 5 5/8 in |
| Length Less Shaft | 8 1/2 in |
| Overall Length | 12 9/16 in |
| Ins. Class | F |
| RPM Range | 1001-1100 |
| Duty | Continuous |
| Shaft Material | Stainless Steel |
| Drain Plugs | 3, 9 O'clock |
| Endshields | Stainless Steel |
| Motor Efficiency Group | Energy Efficient |
| Nominal Efficiency | 63.3 % |
| Includes | (4) SS 10-32 Hex Nuts |
| Standards | UL Recognized CSA Certified |
| Voltage Compatibility | 115, 115/208-2 |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
