Motor must be securely fastened to prevent vibration and minimum noise. For secure mounting, use high-quality bolts of the largest possible diameter. Voltage, frequency, and phase of the power supply must correspond to that shown on the motor nameplate. Low voltage can reduce performance and cause overheating.
| Item | Washdown Motor |
| Motor Application | Washdown |
| Motor Design | 3-Phase |
| Motor Enclosure Design | Totally Enclosed Fan-Cooled |
| HP | 3/4 |
| Nameplate RPM | 1745 |
| Frame | 56 |
| NEMA Design | B |
| Motor Shaft Rotation | CW/CCW |
| Voltage | 230/460 |
| Full Load Amps | 2.3/1.2 |
| Phase | 3 |
| Hz | 60/50 |
| Motor Mounting Position | All Angle |
| Motor Mounting Type | Rigid Base |
| Motor Bearings | Ball |
| Motor Frame Material | Epoxy Coated Rolled Steel |
| Motor Thermal Protection | None |
| Motor Service Factor | 1.15 |
| Max. Ambient Temp. | 40 Degrees C |
| Shaft Dia. | 5/8 in |
| Shaft Length | 1 7/8 in |
| Motor Shaft Design | Keyed |
| Body Dia. | 6 15/16 in |
| Length Less Shaft | 11 1/2 in |
| Overall Length | 13 7/16 in |
| Ins. Class | F |
| RPM Range | 1701-1800 |
| Duty | Continuous |
| Shaft Material | 303 Stainless Steel |
| Conduit Box | Cast Oversized Gasketed |
| Drain Plugs | (4) Each End, (2) In Conduit Box |
| Endshields | Cast Aluminum |
| Motor Efficiency Group | NEMA Premium Efficient |
| Nominal Efficiency | 81.5 % |
| CC Number | CC030A |
| Application | High Humidity, Wet Environments and Areas Where Motor is Occasionally Exposed to High Pressure Washdowns |
| Includes | Side-Mo |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
