Featuring built-in transient and surge suppression, this control is for permanent magnet or shunt-wound DC motors and gearmotors. The solid-state speed control converts line voltage input to full-wave DC power on constant- or diminishing-torque applications.
| Item | DC Speed Control |
| Enclosure | NEMA 4/12 |
| Max. Amps | 10 A |
| Voltage Output | 0 to 90/180V DC |
| Speed Range | 1 |
| Rotation | Reversable |
| External Switches | ON/OFF, FWD/STOP/REV |
| AC Input Voltage | 120/240V AC |
| DC Speed Control | SCR |
| HP @ Lower Volts | 1/8 to 1 |
| HP @ Higher Volts | 1/4 to 2 |
| Linear Acceleration | Fixed 1 to 3 sec |
| Linear Deceleration | Fixed 0.5 sec |
| Current/Torque Limit | Adjustable |
| Speed Regulation | +/-1% of Motor Base Speed |
| Shunt Wound Volts | 100/200V DC |
| Accepts Tach Feedback | Yes |
| Dynamic Braking | Yes |
| Power On Light | Yes |
| IR Compensation | Adjustable |
| Mount Type | Wall |
| Height | 9.5 in |
| Depth | 5.5 in |
| Width | 5 in |
| Operating Temp. | -10 Degrees to 45 Degrees C |
| For Use With | For Packaging Equipment, Pumps, Fans, Blowers, Conveyors and Other Constant or Diminishing Torque |
| Standards | cULus Listed |
| Includes | Built-in Transient and Surge Suppression, Run/Stop Switch |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
