Lathe; Application: Metal Turning; Voltage: 115; Horsepower: 7/8; Overall Height: 14 1/4 in; Overall Length: 33 in; Overall Width: 16 3/4 in; Distance Between Centers: 12 in; Min. Spindle Speed: 150 RPM; Max. Spindle Speed: 2,500 RPM; Tailstock Taper: MT2; Bed Width: 3-15/16 in; Features: Hardened and Adjustable Accurate Tapper Roller Bearings; Frequency: 60 Hz; Includes: Change Gear Kit, Jaw Chuck, Quadruple Tool Holder, Splash Board and Chip Tray, Steady Center MT2 and MT3; Max. Cross Feed: 0.008 in; Max. Metric Thread: 3mm; Min. Cross Feed: 0.0042 in; Min. Metric Thread: 0.4mm; Number of Inch Threads: 14; Number of Metric Threads: 12; Number of Spindle Speeds: Variable; Phase: 1; Spindle Bore: 3/4; Swing Over Bed: 8 in; Swing Over Cross Slide: 4 in
| Item | Lathe |
| Application | Metal Turning |
| Voltage | 115 |
| Horsepower | 7/8 |
| Overall Height | 14 1/4 in |
| Overall Length | 33 in |
| Overall Width | 16 3/4 in |
| Distance Between Centers | 12 in |
| Min. Spindle Speed | 150 RPM |
| Max. Spindle Speed | 2,500 RPM |
| Tailstock Taper | MT2 |
| Bed Width | 3-15/16 in |
| Features | Hardened and Adjustable Accurate Tapper Roller Bearings |
| Frequency | 60 Hz |
| Includes | Change Gear Kit, Jaw Chuck, Quadruple Tool Holder, Splash Board and Chip Tray, Steady Center MT2 and MT3 |
| Max. Cross Feed | 0.008 in |
| Max. Metric Thread | 3mm |
| Min. Cross Feed | 0.0042 in |
| Min. Metric Thread | 0.4mm |
| Number of Inch Threads | 14 |
| Number of Metric Threads | 12 |
| Number of Spindle Speeds | Variable |
| Phase | 1 |
| Spindle Bore | 3/4 |
| Swing Over Bed | 8 in |
| Swing Over Cross Slide | 4 in |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
