The Dayton 1-phase washdown motor is built to comply with NEMA standard MG1-1.26.6 for washdown motors. 303 stainless steel shaft. V-ring rotating seal. Double-sealed, oversize bearings and spring-loaded contact seals in each endshield are lubricated with moisture-resistant grease. Conduit boxes have drains to shed excess moisture. White epoxy finish for superior resistance to caustic cleaning solutions. For high humidity/wet environments and areas where motor is occasionally exposed to high-pressure washdowns.
| Item | Washdown Motor |
| Motor Application | Washdown |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Totally Enclosed Air-Over |
| HP | 1/4 |
| Nameplate RPM | 1700 |
| Frame | 56YZ |
| Motor Shaft Rotation | CW/CCW |
| Voltage | 115/230 |
| Full Load Amps | 3.5/1.7 |
| Phase | 1 |
| Hz | 60 |
| Motor Mounting Position | All Angle |
| Motor Mounting Type | Yoke |
| Motor Thermal Protection | Auto |
| Motor Service Factor | 1 |
| Max. Ambient Temp. | 40 Degrees C |
| Shaft Dia. | 1/2 in |
| Shaft Length | 3 in |
| Motor Shaft Design | Keyed |
| Length Less Shaft | 7 7/8 in |
| Ins. Class | F |
| RPM Range | 1601-1700 |
| Shaft Material | 303 Stainless Steel w/V-Ring Rotating Seal |
| Drain Plugs | T-type |
| Motor Efficiency Group | Energy Efficient |
| Nominal Efficiency | 57.6 % |
| Standards | UL Recognition (E37403) and CSA Certification (258501), USDA Approved paint finish |
| Voltage Compatibility | 115, 115/230, 120, 120/240, 230, 240 |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
