Universal 115VAC/DC Right-Angle Gearmotors,Enclosure: vented Gearcase: die-cast zinc Lubrication: grease-filled Gears: input gear steel; output gear cast iron Bearings: bronze sleeve on case and motor Mounting: all-position 60/50 Hz Rotation: reversible Thermal protection: none Brushes: replaceable; approx. 300 hr. life Ambient: 40C Overall depth 8-7/8" Input power: 1/15 HP UL Recognized,Note: Ratings shown are at 60 Hz. Gearmotors are also operable at 50 Hz, with HP and rpm at 5/6 of the 60-Hz rating.
| Item | AC/DC Gearmotor |
| Gearmotor Type | AC/DC Gearmotor |
| Gearmotor Voltage | 115V AC/DC |
| Full Load Torque | 18 in-lb |
| Gearmotor Shaft Type | Single Right |
| Gearmotor Shaft Orientation | Right Angle |
| Nameplate RPM | 90 RPM |
| Insulation Class | B |
| Gearmotor Mounting Position | All Angle |
| Length Less Shaft | 8 3/4 in |
| Hz | 60/50 Hz |
| Gearmotor Phase | 1 |
| Reversible Shaft Output | No |
| Overhung Load | 100 lb |
| Input HP | 1/15 |
| Gear Ratio | 1 |
| Full Load Amps | 1.3 A |
| Gearmotor Enclosure | Open |
| Thermal Protection | None |
| Max. Ambient Temp. | 40 Degrees C |
| Gearmotor Rotation | CW/CCW |
| Motor Type | Universal |
| Overall Length | 8 9/16 in |
| Keyway Size Type | #404 Woodruff Key |
| Shaft Dia. (Dimension U) | 1/2 in |
| Shaft Length (Dimension V) | 1 5/8 in |
| Bearings | Porous Bronze Sleeve on Case, Sleeve on Motor |
| Lubrication | Grease Filled |
| Brushes | Externally Replaceable |
| Finish | Unpainted |
| Housing Material | Die Cast Zinc |
| Gear Case | Die Cast Zinc |
| Gear Material | Input Gear Steel, Worm Hardened Steel, Output Gear Cast Iron |
| Gear Type | Worm |
| Seals | Lip Type on Output Shaft |
| Standards | UL Recognized |
| Replacement Brushes | 1YNR |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
