Multi-HP PSC Direct-Drive/Fan Multi-Speed Motors,NEMA frame: 48YZ (5-5/8" body dia.) Enclosure: open air-over Mounting: ring/stud/band Service factor: 1.0 Insulation: Class B Thermal protection: auto Shaft orientation: all-angle Rotation: CW/CCW Duty: continuous,Energy-efficient motors operate at multiple horsepowers, reducing inventory needs and expense. Feature quick-change reversing plug.,UL Recognized and CSA Certified.
| Item | Direct Drive Blower Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| HP | 1/2 to 1/5 |
| Nameplate RPM | 825 |
| Voltage | 208-230 |
| Full Load Amps | 3.9-1.4 |
| Hz | 60 |
| Phase | 1 |
| Frame | 48YZ |
| Motor Service Factor | 1 |
| Max. Ambient Temp. | 60 Degrees C |
| Ins. Class | B |
| Duty | Continuous |
| No. of Speeds | 4 |
| Motor Mounting Type | Stud |
| Motor Mounting Position | All Angle |
| Motor Bearings | Ball |
| Motor Thermal Protection | Auto |
| Motor Shaft Rotation | CW/CCW |
| Nominal Efficiency | 53.3 % |
| Body Dia. | 5 5/8 in |
| Length Less Shaft | 6 5/8 in |
| Overall Length | 13 3/16 in |
| Shaft Dia. | 1/2 in |
| Shaft Length | 6 in |
| Motor Shaft Design | Double-Flat |
| Capacitor Required | 2MDV7 |
| Resilient Ring Dia. | 2 1/4 in |
| Ring to Ring Center | 6 5/8 in |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Bolt Circle Dia. | 5 1/8 in |
| Standards | CSA Certified (258501), UL Recognized (E37403) |
| Application | Blowers, Fans and Air Circulators |
| Voltage Compatibility | 115/208-230, 208-230, 208-240 |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
