DC Permanent Magnet Motor; Motor Application: HVAC/R; Motor Sub Application: Direct Drive Fan/Blower; Motor Design: DC Permanent Magnet; HP: 1/35; Motor Enclosure Design: Totally Enclosed Nonventilated; Nameplate RPM: 2350; Voltage: 12V DC; Full Load Amps: 3.8 A; Frame: Non-Standard; Motor Mounting Type: Stud; Motor Thermal Protection: None; Ins. Class: A; Bearings: Sleeve; Max. Ambient Temp.: 40 Degrees C; Rotation: CW/CCW; Overall Length: 4 7/8 in; Length Less Shaft: 3 7/8 in; Body Dia.: 3 7/32 in; Shaft Dia.: 1/4 in; Shaft Length: 1 in; Face Mounting O.C.: 7/8 in x 1-7/16 in; Stud Quantity: (2) #8-32; Mounting Stud Location: Shaft End; Sheath Dia.: 1/2 in; Features: 8 in L Positive Lead and 37 in L Negative Lead, Both with Ring Terminals; Voltage Compatibility: 12V DC
| Item | DC Permanent Magnet Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Design | DC Permanent Magnet |
| HP | 1/35 |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| Nameplate RPM | 2350 |
| Voltage | 12V DC |
| Full Load Amps | 3.8 A |
| Frame | Non-Standard |
| Motor Mounting Type | Stud |
| Motor Thermal Protection | None |
| Ins. Class | A |
| Bearings | Sleeve |
| Max. Ambient Temp. | 40 Degrees C |
| Rotation | CW/CCW |
| Overall Length | 4 7/8 in |
| Length Less Shaft | 3 7/8 in |
| Body Dia. | 3 7/32 in |
| Shaft Dia. | 1/4 in |
| Shaft Length | 1 in |
| Face Mounting O.C. | 7/8 in x 1-7/16 in |
| Stud Quantity | (2) #8-32 |
| Mounting Stud Location | Shaft End |
| Sheath Dia. | 1/2 in |
| Features | 8 in L Positive Lead and 37 in L Negative Lead, Both with Ring Terminals |
| Voltage Compatibility | 12V DC |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
