Motor-Mounted Speed Control,IP30 enclosure 4A max. Operating temp: 104F (40C) Accepts tach feedback,For 90VDC permanent magnet motors and gearmotors up to 1/6 HP. SCR controller direct-mounts to motor endbell. Features adjustable current/torque limit and maximum and minimum speed pots. Easy assembly.
| Item | DC Speed Control |
| Enclosure | IP30 |
| Max. Amps | 3 A |
| Voltage Output | 0 to 90V DC |
| Speed Range | 1 |
| Rotation | Single Direction |
| External Switches | None |
| AC Input Voltage | 120V AC |
| DC Speed Control | SCR |
| HP @ Lower Volts | 1/35 to 1/6 |
| Current/Torque Limit | Adjustable |
| Speed Regulation | 10 to 30% |
| Accepts Tach Feedback | Yes |
| Power On Light | No |
| IR Compensation | None |
| Follower Circuit | No |
| Mount Type | Motor Endbell |
| Height | 3.6 in |
| Depth | 3.19 in |
| Width | 2.61 in |
| Operating Temp. | 0 Degrees to 40 Degrees C |
| For Use With | 90V PMDC Motors |
| Includes | Current Limit, Max Speed And Min Speed Setting Pots |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
