This motor is designed with an integral yoke bracket. The studs allow the fan guard to be mounted directly to the shaft endshield.
| Item | Pedestal Fan Motor |
| Motor Design | Split-Phase |
| Phase | 1 |
| HP | 1/3 |
| No. of Speeds | 1 |
| Voltage | 115 |
| Motor Shaft Rotation | CW/CCW |
| Frame | 48YZ |
| Motor Enclosure Design | Open Air-Over |
| Motor Mounting Type | Yoke |
| Shaft Dia. | 5/8 in |
| Shaft Length | 2 in |
| Motor Thermal Protection | Auto |
| 10 Ft. Cord and Pull Chain Switch | Yes |
| Nameplate RPM | 1725 |
| Motor Application | HVAC/R |
| Motor Sub Application | Pedestal Fans |
| Full Load Amps | 4.8 |
| Hz | 60 |
| Motor Service Factor | 1 |
| Ambient Temperature | 40 Degrees C |
| Max. Ambient Temp. | 40 Degrees C |
| Ins. Class | B |
| Duty | Continuous |
| Motor Bearings | Ball |
| Body Dia. | 5 5/8 in |
| Overall Length | 10 in |
| Motor Shaft Design | Flat |
| Capacitor Required | No |
| Standards | CSA Certified, UL Recognized |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
