Availability : Usually Ships in 3 Business Days
Motor must be securely fastened to prevent vibration and minimum noise. For secure mounting, use high-quality bolts of the largest possible diameter. Voltage, frequency, and phase of the power supply must correspond to that shown on the motor nameplate. Low voltage can reduce performance and cause overheating.
Item | Washdown Motor |
Motor Application | Washdown |
Motor Design | 3-Phase |
Motor Enclosure Design | Totally Enclosed Fan-Cooled |
HP | 10 |
Nameplate RPM | 1760 |
Frame | 215TC |
NEMA Design | B |
Motor Shaft Rotation | CW/CCW |
Voltage | 230/460 |
Full Load Amps | 23.9/11.9 |
Phase | 3 |
Hz | 60 |
Motor Mounting Position | All Angle |
Motor Mounting Type | Face |
Motor Bearings | Ball |
Motor Frame Material | Epoxy Coated Rolled Steel |
Motor Thermal Protection | None |
Motor Service Factor | 1.15 |
Max. Ambient Temp. | 40 Degrees C |
Shaft Dia. | 1 3/8 in |
Shaft Length | 3 1/8 in |
Motor Shaft Design | Keyed |
Body Dia. | 9 5/8 in |
Length Less Shaft | 17 1/4 in |
Overall Length | 20 7/16 in |
Ins. Class | F |
RPM Range | 1701-1800 |
Duty | Continuous |
Shaft Material | 303 Stainless Steel |
Conduit Box | Cast Oversized Gasketed |
Drain Plugs | (4) Shaft End, (3) Lead End, (2) In Conduit Box |
Endshields | Cast Aluminum |
Motor Efficiency Group | NEMA Premium Efficient |
Nominal Efficiency | 91.7 % |
CC Number | CC030A |
Standards | CSA Certified (258525), UL Recognized (E47479), USDA Approved |
Voltage Compatibility | 208, 208-220/440, 208-230, 20 |