Motors is designed for use in the food processing, chemical processing, and beverage industries. All exterior components are paint- and coating-free 300 Series stainless steel, to provide maximum corrosion resistance in severe-duty and washdown environments. 4 drains in each endshield allow drainage of condensation in any mounting position.
| Item | Washdown Motor |
| Motor Application | Washdown |
| Motor Design | 3-Phase |
| Motor Enclosure Design | Totally Enclosed Fan-Cooled |
| HP | 2 |
| Nameplate RPM | 3480 |
| Frame | 56HC |
| Motor Shaft Rotation | CW/CCW |
| Voltage | 230/460 |
| Full Load Amps | 4.8/2.4 |
| Phase | 3 |
| Hz | 60 |
| Motor Mounting Type | Face/Base |
| Motor Bearings | Ball |
| Motor Frame Material | Stainless Steel |
| Motor Thermal Protection | None |
| Motor Service Factor | 1.15 |
| Max. Ambient Temp. | 40 Degrees C |
| Shaft Dia. | 5/8 in |
| Shaft Length | 1 7/8 in |
| Motor Shaft Design | Keyed |
| Overall Length | 13 1/4 in |
| Ins. Class | F |
| RPM Range | 3001-3600 |
| Duty | Continuous |
| Shaft Material | 300 Series Stainless Steel |
| Drain Plugs | 4 Condensate Drains (at 3, 6, 9 and 12 O'clock) Plus 2 T-drains (1 Pre-installed Opposite Shaft End in 6 O'clock Position, the Other Loose in the Carton for Customer Installation at Low Point of Motor) |
| Endshields | 300 Series Stainless Steel |
| Motor Efficiency Group | Premium Efficient |
| Nominal Efficiency | 85.5 % |
| CC Number | CC082A |
| Standards | CE Compliant, CSA Certified, UL Component Recognized |
| Voltage Compatibility | 208, 208-220 |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
