Availability : Usually Ships in 1 Business Days
For use in the food processing, chemical processing, and beverage industries, this motor is well-sealed against moisture and condensation to protect internal components. It has a completely paint- and coating-free exterior. All exterior components are 300 Series stainless steel to provide maximum corrosion resistance in severe-duty and washdown environments. Heavy polyester insulating varnish is applied to the windings for extra moisture and corrosion resistance. Additional features include moisture-resistant sealant between the frame and endbells, and double-sealed oversized bearings with rust-inhibitive grease. The shaft-end bearing is locked internally to limit axial endplay. Four drains in each endshield allow drainage of condensation in any mounting position.
| Item | Washdown Motor |
| Motor Application | Washdown |
| Motor Design | 3-Phase |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| HP | 1/3 |
| Nameplate RPM | 3500 |
| Frame | 56C |
| Motor Shaft Rotation | CW/CCW |
| Voltage | 208-230/460 |
| Full Load Amps | 1.2-1.1/0.55 |
| Phase | 3 |
| Hz | 60 |
| Motor Mounting Type | Face/Base |
| Motor Bearings | Ball |
| Motor Frame Material | Stainless Steel |
| Motor Thermal Protection | None |
| Motor Service Factor | 1.15 |
| Max. Ambient Temp. | 40 Degrees C |
| Shaft Dia. | 5/8 in |
| Shaft Length | 1 7/8 in |
| Motor Shaft Design | Keyed |
| Overall Length | 9 3/8 in |
| Ins. Class | F |
| RPM Range | 3001-3600 |
| Duty | Continuous |
| Shaft Material | 300 Series Stainless Steel |
| Drain Plugs | 4 Condensate Drains (at 3, 6, 9 and 12 O'clock) Plus 2 T-drains (1 Pre-installed Opposite Shaft End in 6 O'clock Position, the Other Loose in the Carton for Customer Installation at Low Point of Motor) |
| Endshields | 300 Series Stainless Steel |
| Motor Efficiency Group | Energy Efficient |
| Nominal Efficiency | 74 % |
| Standards | CE Compliant, CSA Certified, UL Component Recognized |
| Voltage Compatibility | 208, 208-220/440, 20 |




