Keep air circulating with this direct drive blower motor. It features a permanent split capacitor motor design, and is suitable for use in direct-drive fans and blowers. It also features an open, air-over enclosure design, which mounts within the airflow of the fan to stay cool. Auto thermal protection allows the motor to start automatically after tripping.
| Item | Direct Drive Blower Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| HP | 1/3 |
| Nameplate RPM | 825 |
| Voltage | 230 |
| Full Load Amps | 2.8 |
| Hz | 60 |
| Phase | 1 |
| Frame | 48Y |
| Motor Service Factor | 1 |
| Max. Ambient Temp. | 40 Degrees C |
| Ins. Class | B |
| Duty | Continuous |
| No. of Speeds | 1 |
| Motor Mounting Type | Ring |
| Motor Mounting Position | Horizontal |
| Motor Bearings | Ball |
| Motor Thermal Protection | Auto |
| Motor Shaft Rotation | CW/CCW |
| Nominal Efficiency | 54.4 % |
| Body Dia. | 5 11/16 in |
| Length Less Shaft | 6 11/16 in |
| Overall Length | 12 1/4 in |
| Shaft Dia. | 1/2 in |
| Shaft Length | 5 1/2 in |
| Motor Shaft Design | Flat |
| Capacitor Required | 2MDV4 |
| Resilient Ring Dia. | 2 1/2 in |
| Ring to Ring Center | 6 3/8 in |
| Mounting Stud Location | Both Ends |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Stud Size | #8-32 |
| Mounting Stud Length | 1 1/16 in, 1 1/4 in |
| Bolt Circle Dia. | 5 1/8 in |
| Standards | UL Recognized ( E6312); CSA Certified(LR2025) |
| Application | Blowers, Fans and Air Circulators |
| Manufacturers Warran | Manufacturers Warran |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
