Instrumentation Check Valves, Cracking pressure: 10 psi,Provide unidirectional flow control of fluids and gases. Blowout-resistant seat design. Machined backstop reduces spring stress. Stainless steel check valves have fluorocarbon seats. Brass check valves have nitrile rubber seals. Compression connections.,Brass, 3000 psig CWP Temp. range: -30 to 275F
| Item - Check Valves | Check Valve |
| Flow Design | Single |
| Mechanism and Body Design | Inline Poppet |
| Body Material - Valves | Brass |
| Pipe or Tube Size - Check Valves | 1/4 in |
| Connection Type - Check Valves | Compression x Compression |
| Cracking Pressure - Check Valves | 10 psi |
| Mounting Orientation - Check Valves | Horizontal, Vertical |
| Seal Material - Check Valves | Nitrile |
| Max. Temp. - Valves | 275 Degrees F |
| Min. Temp. - Valves | -30 Degrees F |
| Max. Water Pressure - Valves | 3000 psi @ 100 Degrees F |
| Max. Steam Pressure - Valves | Not Rated |
| Seat Material - Check Valves | Nitrile |
| Spring Material - Check Valves | 316 Stainless Steel |
| Flow - Valves | 0.75 gpm |
| Full Flow - Valves | No |
| Application - Valves | General Purpose |
| Length | 2 13/32 in |
| Hex Size | 3/4 in |
| Standards | ASTM B 16 Alloy C36000 |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
