Motor Brake Kits,IP23, rolled steel enclosure 1 to 30 HP 1200 to 3600 rpm 3-phase, 230/460V,Kit easily installs on back of motor to convert from unit-mount to brake-mount use. Kit size is determined by NEMA frame and ft.-lb. of static torque required for the application. Include mounting hardware.
| Item | Motor Brake Kit |
| Type | 182T, 182TC, 182TCH, 184T, 184TC, 184TCH |
| Static Torque | 15 ft-lb |
| For Use With | USEM Unimount Motors |
| RPM Range | 1200 to 3600 |
| Voltage | 230/460 |
| Hz | 60/50 |
| Phase | 3 |
| Holding Amps | 0.1 |
| Inrush Amps | 1 |
| Mounting | Rear End |
| Max. Ambient Temperature | 40 Degrees C |
| Enclosure | IP23 |
| Enclosure Material | Rolled Steel |
| Wire Termination | Flying Leads |
| Holds | Y |
| Diameter | 8 3/4 in |
| Overall Length | 4.75-30V DC |
| ODE Shaft Diameter | -10 Degrees to 45 Degrees C |
| Manufacturers Warranty Length | 1 yr |
| Mfr. Stock No. | 958193 |
| Includes | Mounting Hardware |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
