Bobrick B-6806x48 (48 x 1.5) Concealed Mounting W/ Snap Flange Grab Bars
Availability : In Stock - Usually Ships Same Business Day
✅ ADA Compliant Grab Bar For Commercial Restrooms
✅ 18” Straight Grab Bar With Concealed Snap Flange Mounting
✅ 18-Gauge Stainless Steel With Satin Finish
✅ 1-1/2” Diameter Bar With 1-1/2” Wall Clearance
✅ Concealed Mounting Hides Hardware For Clean Appearance
✅ Supports Up To 900 Lbs When Properly Installed
The Bobrick B-6806x48 Concealed Mounting With Snap Flange Grab Bar is the longest snap flange grab bar available from Bobrick in the 1-1/2 inch diameter style. Crafted from 18-gauge stainless steel, the bar is 48 inches in length. Thanks to the grab bar's satin finish, the piece has a reflective, attractive appearance, but requires only minimum upkeep in order to keep the bar free of fingerprints. At 3-1/4 inches in size, the cover snaps into place on the mounting flange and covers the installation screws. The cover is fabricated from 22-gauge stainless steel. To increase the strength of the piece, the grab bar passes through the mounting flange and is joined to it with heliarc welding. The mounting flange is a 1/8-inch stainless steel plate that measures 2 inches in width by 3-1/8 inches in height. If installed with 1-1/2 inches of clearance, the grab bar can withstand up to 900 pounds of weight.
| Product Type | Grab Bar |
| Material | Stainless Steel |
| Nominal Size (In.) | 48" X 1.5" |
| Surface Type | Smooth |
| Length (In.) | 48" |
| Dia. (In.) | 1.5" |
| Total Recycled Content | 65% |
WARNING: California Residents
This product and/or packaging can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
